Entries by Andreas Poppe

Transport of 6 metres wide steelflanges

Fracht: Stahlflange Abholort: Bremerhaven Zielort: Cuxhaven Bremer Lloyd wurde gebeten den schnellst möglichen Transport von 6 Meter breiten Stahlflangen von Bremerhaven nach Cuxhaven zu organisieren. Bremer Lloyd charterte ein Schiff, belud das Kümo direkt am Containerterminal und arrangierte die Ladungssicherung der losen und noch auf Flatracks gestauten Stahlflange.

23. January 2018 by

Monopile flanges with a diameter of 6 metres

Freight: Monopile Flanges Destination: Rostock Bremer Lloyd secured the transport of multiple lots of monopile flanges, which required to be transported by sea, due to the big diameter of 6 metres. Bremer Lloyd arranged the sea transport and on-carriage to the factory.

6. December 2017 by

Two Vestas V80 to Italy

Fracht: 2x gebrauchte Vestas V80 Abholort: Hofschwicheldt (Deutschland) Zielort: Bisaccia (Italien) Bremer Lloyd hat den Zuschlag für den Transport von zwei gebrauchten Vestas Anlagen von der Abbaustelle bis zur neuen Errichtungsstelle bekommen. Bremer Lloyd musste passende Transportgestelle mieten und die Montage arrangieren. Dazu gehörte auch das Drehen und montieren der Rotorblätter in stapelbare Transportgestelle. Es wurde […]

22. November 2017 by

Emergency rotor blade transport

Freight: Rotor blade Pickup: Turkey Destination: Spain After the importing vessel was heavily delayed, Bremer Lloyd has been asked to work out a solution to transport a test rotor blade on the fastest way to a rotor blade test centre. The rotor blade has been discharged in Turkey and Bremer Lloyd fixed a vessel, which […]

25. October 2017 by

Transport of a drilling-rig

Freight: drilling-rig Pickup: Renchen (Germany) Destination: Chennai (India) Bremer Lloyd was tasked with delivering a drilling-rig from Renchen in Germany to Chennai in India. The challenge here was the short notice and tight schedule. To save time for the permits for road transport, we loaded the rig with a weight of 41,8 tons and a […]

6. October 2017 by

Rotor house transport

Freight: Rotor house Pickup: Zeebrügge (Belgium) Destination: Montoir (France) Bremer Lloyd has recently been awarded with the transport of a rotor house from Zeebrugge to Montoir. The circumstances that the rotor house had a diameter of more than 7 metres, lead to the decision to charter in a coaster vessel, which transported the rotor house […]

3. September 2017 by

wind turbine and route survey

Freight: Wind turbine Pickup: Germay Destination: Corwen (Great Britain) Bremer Lloyd has delivered a wind turbine from Germany to Corwen (UK). Since the components were supposed to be transported with special vehicles over the road up to the job site, a route survey of the narrow and winding British country roads was conducted, to make […]

7. August 2017 by

B2Run

Recently a part of the Bremer Lloyd team participated the annual company run “B2Run”. Despite the bad weather conditions, everybody finished the course of 6.2 km along the Weser river and celebrated the success together afterwards. With 6,500 participants the B2Run event is the biggest company run in Bremen. Next year we’ll participate with our […]

15. June 2017 by

Transport of a Weser ferry

Freight: Weser ferry Pickup: Bremen Destination: Londonderry Bremer Lloyd has been awarded with the elaboration of a transport concept and the transport realization of a used Weser ferry. From the technical elaboration, to the procurement of the required lifting equipment, the coordination of loading and the chartering of the sea vessel, was everything in the […]

23. January 2017 by

Transport of rotor blades

Freight: Rotor blades Pickup: Arkansas (USA) Destination: Germany Bremer Lloyd has again been awarded with the pickup of wind turbine blades ex works. The blades have been picked up in Arkansas and transported to the port of Houston, where they have been loaded on to a chartered sea vessel and shipped to Germany. The pickup […]

6. January 2017 by